MPP    METALLIZED   POLYPROPYLENE   FILM  CAPACITOR

 

FEATURES

Dielectric :

Ploypropylene film

Plates :

aluminium layer deposited by evaporation under vacuum.

Winding :

non-incuctive type.

Leads :

tinned wire (minmum lead content 5%)

Protection :

Coated flame retardant epoxy resin.

Marking :

Manufacturer's logo, series dielectric code, capacitance,     tolerance, D.C. nominal volatage.

Operating temperature :

-40  to  +85

ELECTRICAL CHARATERISTICS

Nominal voltrage (Vn) :

100Vdc  250Vdc  400Vdc  630Vdc

Capacitance range :

0.01  to 10

Capacitance tolerance : (measured at 1KHz)

5%(J)  10%(K )

Dissipation Factor (DF) : (measured at 1KHz)

0.1 (at 255)

Insulation Resistence :

Test conditions

Temperature              :25 5

Voltage charge time   :1 minute

Voltage charge           : 100Vdc

30,000  for  C0.33

10,000   for  C0.33

Test voltage between terminations :

1.75x Vn applied for 2sec.(at 25 5)

DIMENSIONS  (in mm)

 

CAPACITANCE	Code	100 VDC					250VDC
		L	H	T	P	ød	L	H	T	P	ød
0.033	333
0.047	473						13.0	9.5	5.5	10.0	0.6
0.068	683						13.0	10.5	6.0	10.0	0.6
0.1	104	13.0	10.5	6.5	10.0	0.6	15.0	11.0	7.0	13.0	0.6
0.15	154	13.0	11.0	6.5	10.0	0.6	18.0	12.0	7.0	15.0	0.8
0.22	224	18.0	12.0	6.5	15.0	0.6	18.0	13.0	7.5	15.0	0.8
0.33	334	18.0	14.0	7.5	15.0	0.8	18.0	14.0	8.0	15.0	0.8
0.47	474	18.0	15.0	8.5	15.0	0.8	24.0	16.0	9.0	22.5	0.8
0.68	684	26.0	16.0	8.0	22.5	0.8	24.0	17.0	9.5	22.5	0.8
1.0	105	26.0	17.0	11.0	22.5	0.8	25.0	19.0	11.0	22.5	0.8
1.5	155	26.0	19.0	13.0	22.5	0.8	29.0	18.0	11.0	27.5	0.8
2.2	225	31.0	20.0	13.0	27.5	0.8	29.0	21.0	13.0	27.5	0.8
3.3	335	31.0	21.0	15.0	27.5	0.8	29.0	23.0	15.0	27.5	1.0
4.7	475	31.0	23.0	17.0	27.5	1.0	29.0	25.0	18.0	27.5	1.0
6.8	685	31.0	25.0	21.0	27.5	1.0
8.2	825	31.0	26.0	23.0	27.5	1.0
10.0	106	31.0	28.0	24.0	27.5	1.0