MPPS    METALLIZED   POLYPHENYLENE-SULPHIDE  CAPACITOR

 

FEATURES

Ideally suited for temperatures up to +140.

Very constant capacitance value with temperature.

Low dissipation factor (TAN δ)

Low dielectric absorption

In virtue of high temperatures resistance ideally suited for

automotive applications under the hood as well as for

sensory equipment in hot media.

Available taped and reeled.

CHARACTERISTICS

Capacitor electrodes:  Vacuum-deposited aluminum

Encapsulation: Flame-retaredent plastic case, UL 94 V-0 with

epoxy resin seal (color: Brown / Marking: Black)

Temperature range : -55 to +140

Test Category : 55/140/56 in accordance with IEC.

Insulation resistance : +20 , 1min.

Measuring time : 1 min.

Capacitance tolerances : 20%, 10%, ( 5% available subject to special enquiry)

Dissipation factors at +20 : TAN δ

 

at  f	C < 0.1	0.1 < C < 2.2
1 kHz	< 15 x 10-4	< 20 x 10-4
10 kHz	< 20 x 10-4	< 25 x 10-4
100 kHz	< 50 x 10-4	< 80 x 10-4

Maximum pluse rise time:

 

Capacitance	Pluse rise time V/μsec Max operation test
	63VDC	100VDC
0.01 ~ 0.022	35/350	35/350
0.033 ~ 0.068	20/200	20/200
0.1 ~ 0.47	15/150	15/150
0.68 ~ 1.0	12/120	12/120
1.5 ~ 2.2	8/30	8/30

Test voltage : 1.6 Vr, 2sec

vibration : 6hours at 10~2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6

Low air density : 1kPa = 10mbar in accordance with IEC 60068-2-13

Bump test : 4000 bumps at 390m/pc  in accordance with IEC 60068-2-29

voltage derating : A voltage derating factor of 0.75% per K must be applied from +125 for DC voltages and from

                                 +110 for AC voltages.